Blog

One of the newest models of tiny blenders with a cup or jug-style containers is the Nutribullet. This makes consuming smoothies on the go much simple and easier.

This blender’s design attempts to maximize the nutritional value of your ingredients. With all these features, the most important question arises; Are Nutri bullet cups dishwasher safe? Yes, the nutribullet cups can be cleaned using the dishwasher.

Can you put Nutri bullet cups in the dishwasher?

Thankfully, the Nutribullet cups are dishwasher-safe. Without concern, the cups can be put on the highest rack. These cups may be easily washed and are made of BPA-free plastic. According to the manual, cleaning the cup from any food or remaining debris only requires a little soap and minimal effort.

Dishwasher use for Nutribullet cup cleaning

To clean the cup, follow these procedures.

Disassemble

The cup can be hand-washed or put on the top rack of a dishwasher

The cup can be hand-washed or put on the top rack of a dishwasher

Hand washing cups is always secure. Use dish soap, a sponge, and warm water to thoroughly wash the components’ interior and exterior.
It is better to put the cups on the top shelf of the dishwasher while a regular rinse cycle is running, though, as the cups are dishwasher-safe.

Note: Avoid using the Nutribullet’s sterilize cycle or immersing any parts in boiling water.

Use soap plus water to clean the cup

To clean and remove any accumulated food, add two drops of dish soap, and use a sponge. Try using mild dish washing soap for cleaning the cups.

Drying

A dry rag should be used to dry the cup’s outside, interior, and blade. Before reusing them, place them on the drying rack to air dry.

Keeping the Power Base Clean

The power base doesn’t typically become dirty readily in machines. However, since the Nutribullet’s design necessitates turning the blender cup upside-down, spills may occasionally occur.

Following mentioned methods are beneficial while purifying power base;

• Making sure there is no electricity flowing through the apparatus is essential. Once it gets wet, turning it off can still result in electrocution.
• Hand cleaning – By putting a rag into warm water and vigorously wringing it out, dampen it. Carefully clean the power base’s outside and interior. Clear the blender’s base of any debris or food that has become lodged there.
• The power base can also be cleaned more quickly with a citrus cleanser. Just to mention, citrus cleansers use natural oils to get rid of deep food accumulation and stains. The power base is also deodorized by them.

Note:
The power base needs to be sufficiently dried, either with a dry cloth rag or in the open air,before being reconnected to the electrical system. Once a week, or as soon as food spills, the power base should be cleaned.

Alternative Cleaning Techniques

1. Combining Water and Soap
   When ingredients dry inside the Nutribullet, stubborn cleaning comes in useful. In these circumstances, mixing soap and water is advised as an efficient way to clean the cup and blades. The following is the cleaning process for nutribullet parts.

Water and soap should make approximately 2/3 of the blender cup. Lemon that has been roughly chopped may also be used.

1) Tighten the connection between the milling blade and the cup by rotating the milling blade counterclockwise into the cup’s bottom. 
2) Connect the milling blade, soap, and water to the power base. Place the cap on the base and gently press down until the outer blade begins to rotate.
3) Clean the cup in a faucet after emptying the contents.
4) Disinfect the cup and the blades with a napkin before using them, then let them to dry naturally.

How to quickly clean a Nutribullet 

To get rid of any stuck-on food, fill your cup with hot water and dish soap, twist on the extractor edge, and run your nutribullet for 20 to 30 seconds. With a mild scrub and rinse, you can wash your cup and blade after this helps to release any stuck-on substances. (Caution: The edges of the blades are sharp.)

How are NutriBullet blades cleaned?

The Magic Bullet motor base and blades are the only items that should not be put in the dishwasher. To remove any debris that has been stuck on, wash your blades by hand in warm, soapy water using a dish brush.
Rinse the blade in lemon juice or a solution of 10% diluted vinegar and water for a more thorough clean. The warmth from some dishwashers may harm, causing them to loosen and fall, thus we advise hand washing instead of dish washing.
People frequently believe that they must remove the gasket to thoroughly clean their blade. Stop there; the gasket on the blade should not be taken off. The gasket becomes less capable of accomplishing its duty as a result of being loosened.

Are nuetribullet cups interchangeable?

No. The different models of Nutribullet cups cannot be switched. The reason for this is that some of the cups only work with a select few models and not the others. As you can see, Rx cups are exclusively compatible with the Rx model and not any other.

Bottom Line: Is the NurtiBullet Dishwasher Safe?

Is the Nutribullet safe to put in the dishwasher after all this? The cups can all be washed in the dishwasher, as was already mentioned. Dishwashers cannot be used to clean the support base or other parts, including the blades.
In general, I would say that the Nutribullet blender is a wise investment and is most suitable for people who have trouble getting enough fruits and vegetables in their diets or who want to increase their intake of fruits. The blender is simple to use, small, and simple to clean in addition to having an appealing look.

FAQS